HP CD-Writer Plus Internal 8200i Drive - Manual (Page 9)

Installing CD-Writer Plus and Software English-9
E
n
g
lis
h
Most data cable connectors are keyed to fit only one way. If your
connector is not keyed, make sure the cable’s colored edge is aligned with
both PIN-1 on the CD-Writer Plus drive and PIN-1 on the IDE controller.
If the cable is attached incorrectly, your computer may not boot up.
PIN-1
Look for a label identifying PIN-1 next
to the IDE connector. The data cable’s
colored edge is aligned with PIN-1 of
the IDE connector. This illustration
shows a specific computer. Yours may
look different. PIN-1 could be on
either side of the IDE connector.
colored stripe on
the data cable
PIN-1
The cable’s colored edge is aligne
with PIN-1 on the CD-Writer Plus
drive.
Colored stripe on the
data cable