Adding or removing zone configuration members, Renaming a zone configuration – HP Brocade 4Gb SAN Switch for HP BladeSystem c-Class User Manual
Page 105
Fabric OS 5.0.0 Advanced Web Tools user guide 105
2.
Select a format to display zoning members in the Member Selection List as described in ”
3.
Click the Config tab.
4.
Click Create.
The Create New Config dialog box opens.
5.
Enter a name for the new configuration and click OK.
The new configuration appears in the Name list.
6.
Click + signs in the Member Selection List to view the nested elements.
The choices available in the list depend on the selection made in the View menu.
7.
Highlight an element in the Member Selection List that you want to include in your configuration.
The Add Member button becomes active.
8.
Click Add Member to add configuration members.
Selected members are moved to the Config Members window.
9.
Repeat
to add more elements to your configuration.
10.
Select Actions > Save Config Only to save the configuration changes.
To enable the configuration, see ”
NOTE:
Any changes made to the currently enabled configuration do not appear until the configuration is
enabled.
Adding or removing zone configuration members
Use the following procedure to add or remove members of a zone configuration:
NOTE:
You can make changes to a configuration that is currently enabled; however, changes do not
appear until the configuration is enabled.
1.
Launch the Zone Admin module as described on
2.
Click the Config tab.
3.
Select the configuration you want to modify from the Name list.
4.
Click an element in the Member Selection List that you want to include in your configuration or click an
element in the Config Members list that you want to delete.
5.
Click Add Member to add a configuration member.
Click Remove Member to remove a configuration member.
6.
Select Actions > Save Config Only to save the configuration changes.
To enable the configuration, see ”
Renaming a zone configuration
Use the following procedure to change the name of a zone configuration: