Check dimm installation, Save resources (permanent resources) – HP LaserJet P2055dn User Manual

Page 100

Advertising
background image

7.

Close the access door, and press firmly until it snaps into place.

8.

Reconnect the interface cables and the power cord.

9.

Turn the product on.

Check DIMM installation

After installing the DIMM, make sure that the installation was successful.

1.

Turn the product on. Check that the Ready light is illuminated after the product has gone through
the startup sequence. If an error message appears, a DIMM might have been incorrectly installed.
See

Interpret control-panel messages on page 102

.

2.

Print a configuration page (see

Print the information pages on page 70

).

3.

Check the memory section on the configuration page and compare it to the configuration page that
was printed before the memory installation. If the amount of memory has not increased, the DIMM
might not be installed correctly, or the DIMM might be defective. Repeat the installation procedure.
If necessary, install a different DIMM.

NOTE:

If you installed a product language (personality), check the "Installed Personalities and

Options" section on the configuration page. This area should list the new product language.

Save resources (permanent resources)

Utilities or jobs that you download to the product sometimes include resources (for example, fonts,
macros, or patterns). Resources that are internally marked as permanent remain in the product memory
until you turn the product off.

88

Chapter 9 Manage and maintain the product

ENWW

Advertising
This manual is related to the following products: