Vertical repetitive defects, Misformed characters, Page skew – HP LaserJet P2055dn User Manual

Page 133

Advertising
background image

Vertical repetitive defects

The print cartridge might be damaged. If a repetitive mark
occurs at the same spot on the page, install a new
HP print cartridge.

The internal parts might have toner on them. If the defects
occur on the back of the page, the problem will probably
correct itself after a few more printed pages.

In your printer driver, make sure the appropriate media
type is selected.

Misformed characters

If characters are improperly formed, producing hollow
images, the media stock might be too slick. Try a different
media.

If characters are improperly formed, producing a wavy
effect, the printer might need service. Print a configuration
page. If the characters are improperly formed, contact an
HP-authorized dealer or service representative.

Page skew

Make sure that the media is loaded correctly and the
media guides are not too tight or too loose against the
media stack.

The input bin might be too full.

Check the media type and quality.

ENWW

Solve print-quality problems 121

Advertising
This manual is related to the following products: