HP LaserJet P2055dn - Manual (Page 134)

Curl or wave
● Check the media type and quality. Both high temperature
and high humidity cause media to curl.
● The media might have been in the input tray too long.
Turn over the stack of media in the tray. Also, try rotating
the media 180° in the input tray.
● Open the straight-through output door and try printing
straight through.
● The fuser temperature might be too high. In your printer
driver, make sure the appropriate media type is selected.
If the problem persists, select a media type that uses a
lower fuser temperature, such as transparencies or light
media.
Wrinkles or creases
● Make sure that media is loaded properly.
● Check the media type and quality.
● Open the straight-through output door and try printing
straight through.
● Turn over the stack of media in the tray. Also, try rotating
the media 180° in the input tray.
● For envelopes, this can be caused by air pockets inside
the envelope. Remove the envelope, flatten the
envelope, and try printing again.
Toner scatter outline
● If large amounts of toner have scattered around the
characters, the media might be resisting the toner. (A
small amount of toner scatter is normal for laser printing.)
Try a different media type.
● Turn over the stack of media in the tray.
● Use media that is designed for laser printers.
122 Chapter 10 Solve problems ENWW