Network config. menu – HP LaserJet P2055dn User Manual

Page 28

Advertising
background image

Network config. menu

Use this menu to establish network configuration settings.

Menu item

Description

CFG TCP/IP

Access the TCP/IP menu and set TCP/IP protocol parameters.

BOOTP=YES* Enable IPv4 configuration by a BOOTP Server.

DHCP=YES* Enable IPv4 configuration by a DHCP Server.

If DHCP=YES* and the print server has a DHCP lease, you can configure the following DHCP
settings:

RELEASE: Select whether to release (YES) or save (NO) the current lease.

RENEW: Select whether to renew (YES or NO) the lease.

AUTO IP=YES* Automatically assign a link-local IPv4 address in the form 169.254.x.x.

If you specify BOOTP=NO*, DHCP=NO* and AUTO IP=NO*, you can manually set the following
TCP/IPv4 parameters from the control panel:

Each byte of the IPv4 address (IP)

Subnet Mask (SM)

Syslog Server (LG)

Default Gateway (GW)

Idle Timeout period (default is 270 seconds, 0 disables the timeout)

CFG DNS 1: IPv4 address of a primary DNS server (one byte at a time).

CFG DNS 2: IPv4 address of a secondary DNS server (one byte at a time).

IPV6 = YES*: Enable IPv6 operation. Select NO to disable IPv6 operation.

POLICY=RTR_AV/RTR_UN/ALWAYS: Set one of the following IPv6 addressing policies:

RTR_AV: (default) Stateful auto-configuration method is determined by a router. The router
specifies whether the print server obtains its address, configuration information, or both from
a DHCPv6 server.

RTR_UN: Attempt to obtain stateful configuration from a DHCPv6 server (when a router is
not available).

ALWAYS: Always attempt to obtain stateful configuration from a DHCPv6 server (whether
or not a router is available).

MANUAL= KEEP/DISABLE: Set the behavior of a manually configured IPv6 address detected on
the print server.

KEEP (default): Maintain the address in an active state.

DISABLE: Maintain the address but in an inactive state.

Print an HP Jetdirect configuration page to verify your settings. (The print server can overwrite
selected parameters with values that ensure proper operation.)

16

Chapter 2 Control panel

ENWW

Advertising
This manual is related to the following products: