Set document finishing options – HP LaserJet P2055dn User Manual

Page 77

Advertising
background image

Set document finishing options

To perform the following tasks, open the printer driver and click the Finishing tab.

How do I

Steps to perform

Print on both sides (duplex models only)

1.

Set the product for the correct width of paper that you are
using. At the back of the product, lift the duplex jam-
release door, and locate the blue paper-width selection
lever.

Letter and Legal-size paper: Push the lever in.

A4-size paper: Pull the lever out.

2.

Insert enough paper into one of the trays to accommodate
the print job. If you are loading special paper such as
letterhead, load it in one of the following ways:

For Tray 1, load the letterhead paper face-up with
the top edge feeding into the product first.

For all other trays, load the letterhead paper face-
down with the top edge at the front of the tray.

3.

In the printer driver, click Print on both sides. If you will
bind the document along the top edge, click Flip pages
up
.

4.

Click the OK button to print the job.

Print a booklet (duplex models only)

1.

Set the product for the correct width of paper that you are
using. At the back of the product, lift the duplex jam-
release door, and locate the blue paper-width selection
lever.

Letter and Legal-size paper: Push the lever in.

A4-size paper: Pull the lever out.

ENWW

Use features in the Windows printer driver

65

Advertising
This manual is related to the following products: