HP Insight Management-Software - Manual (Page 38)

add fc-connection
The -add fc-connection command adds a new FC connection to a server profile.
Syntax
-add fc-connection –profilename <profileName>
-connectionbay <ConnectionBay>
[-fabric <FabricName>]
[-speed <auto|1Gb|2Gb|4Gb|8Gb|disabled>]
Parameters
Table 13 Parameter descriptions for -add fc-connection
Optional Required Description Parameter
x Specifies the name of an
existing profile to add the
new connection to. -profilename
x Specifies the bay for the
connection. -connectionbay
x Specifies the name of an
existing fabric to associate -fabric
with the connection. If the
fabric name is not specified,
then the connection will be
marked as unassigned
but associated with a
specific bay.
x Specifies the port speed of
the connection port. Valid -speed
values include auto, 1Gb,
2Gb
, 4Gb, 8Gb, and
disabled . The default port
speed is auto.
NOTE: For HP 4Gb VC-FC
Modules or HP Virtual
Connect 4Gb FC Modules,
supported speed values
include: auto, 1Gb, 2Gb,
4Gb
, and disabled. If it is
set to 8Gb, VC
auto-negotiated the speed.
Output
The function returns the result of the add operation or a jobid if –nb is specified.
38 Using VCEM commands