HP Netserver L Server series - Manual (Page 10)

Chapter 1 HP NetServer Navigator
4
•
SCSI controller and device failure notification
•
Predictive disk problem warning backed by HP proactive warranty
replacement
•
PC LAN adapter card performance statistics, configuration, and problem
information
•
Error alerting and identification for the server’s Power-On Self Tests
•
HP ECC memory, HP Disk Array, HP UPS management software, and
HP Remote Assistant products, including management agents with event
notification integrated into the HP NetServer Assistant/HP OpenView
alarm log
•
Over-the-network temperature monitoring, fan status and redundant power
supply status
•
View of critical server information, such as the BIOS version, EISA and
PCI slot contents, SMP information, serial and parallel ports, and security
status, from a single network management console
•
Control of management console from a remote PC, allowing the same
features to be used at a local management console or non-network-
connected remote PC
HP NetServer Utilities
HP NetServer Utilities takes you to a menu where you can directly execute utilities
such as the following:
•
Diagnostic Assistant: An easy-to-use hardware diagnostic for system
verification, burn-in, and rapid troubleshooting
•
Event Log Report Utility: Displays all logged server management events,
Power-On Self Test (POST) errors and other system events
•
Diskette Library: Allows you to conveniently generate any flexible disk
available on the NetServer Navigator CD-ROM. For example, you can
create the following flexible disks: BIOS Update, EISA Configuration
Utility, NOS Drivers, NetServer Assistant, PowerWise Assistant,
Diagnostic Assistant and Remote Assistant Upgrade.
•
Error Message Utility: Lets you view descriptions for errors that occur
during the Power-On Self Test (POST) and tells how to handle the errors