HP LaserJet 1018 Printer - Manual (Page 53)

Changing the pickup roller
Normal use with good media causes wear. The use of poor media might require more
frequent replacement of the pickup roller.
If the printer regularly mispicks (no media feeds through), you might need to change or clean
the pickup roller. See
Ordering supplies to order a new pickup roller.
CAUTION Failure to complete this procedure might damage the printer.
1. Turn the printer off, and then unplug the power cord from the printer. Wait for the printer
to cool.
CAUTION To prevent damage to the print cartridge, minimize its exposure to direct light. Cover the
print cartridge with a sheet of paper.
2. Open the print cartridge door, and remove the print cartridge.
ENWW Changing the pickup roller 45