HP LaserJet 1018 Printer - Manual (Page 69)

Printer curled the media
● See Curl or wave for more information.
● See Media paths or Choosing paper and other media for more information.
Print job is extremely slow
The maximum speed of the printer is up to 12 ppm for A4 media and 12 ppm for letter media
for the HP LaserJet 1018 printer. Your print job might be very complex. Try the following:
● Reduce the complexity of your document (for example, reduce the number of multiple
graphics).
● Access the printer properties in the printer driver. See Printer properties (driver) for
instructions. Set the media type to plain paper.
NOTE This may cause toner to fuse improperly if you are using heavy media.
● Narrow media or heavy media will slow printing. Use normal media.
● Print speed is based on computer processor speed, the amount of memory, and the
amount of hard disk space available on your computer. Try increasing these components.
Return to Finding the solution .
ENWW Paper handling problems 61