HP Deskjet 6988dt Printer - Manual (Page 126)

State of the Wireless Status light Task
Off Verify the following:
●
An Ethernet cable is not connected to
the printer. Connecting an Ethernet
cable to the printer automatically
turns off the wireless radio. Unplug
the cable.
● The printer is plugged in.
Wireless status light is on
If the wireless status light is on, try reprinting the document, then look at the printer's
wireless communications light:
State of the Wireless Status light Task
Flashes The printer's wireless communications
feature is operating correctly. Try these
solutions , again.
Does not flash The wireless radio is functioning but the
printer and the computer cannot
communicate.
●
The printer's network settings do not
match the settings for the network.
Follow these
steps .
● The computer might be set to the
wrong wireless profile. Follow these
steps .
● A personal software firewall might
block communication between the
printer and the computer. Follow
these
steps .
Printer's network settings do not match the settings for the network
The printer's network settings must match those of the network.
Chapter 11
(continued)
124 HP Deskjet 6980 series