HP Photosmart C6280 All-in-One Printer - Manual (Page 168)

Alignment failed
Cause: An incorrect type of paper is loaded in the input tray.
Solution: If you have color or photo paper loaded in the input tray when you align
the printer, the alignment might fail. Load unused plain white letter or A4 paper into
the input tray, and then try the alignment again. If the alignment fails again, you might
have a defective sensor.
Contact HP support. Go to:
www.hp.com/support
If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.
Cause: The print head assembly or sensor is defective.
Solution: Contact HP support. Go to:
www.hp.com/support
If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.
Replace ink cartridges soon
Cause: The indicated ink cartridge is estimated to be low on ink and might need to
be replaced soon.
Solution: You might be able to continue printing for a short period of time with ink
remaining in the print head assembly. Replace the indicated ink cartridge(s) or follow
the prompts on the display or computer screen to continue.
For more information, see:
“Replace the ink cartridges” on page 99
Scheduled maintenance
Cause: The HP All-in-One performs a periodic maintenance procedure to ensure
excellent print quality.
Solution: Load unused plain white letter or A4 paper in the input tray. Then follow
the prompts on the display or computer screen to continue.
Wrong ink cartridge(s) installed
Cause: The wrong ink cartridge(s) are installed.
Solution: The first time you set up and use the HP All-in-One, make sure to install
the ink cartridges that were shipped with your device. The ink in these ink cartridges
is specially formulated to mix with the ink in the print head assembly.
Errors 167
Trou
bles
ho
ot
ing