HP Designjet 10000s Printer series User Manual
Page 33
Additional information
The product herewith complies with the requirements of the Low-Voltage Directive 73/23/EEC and the
EMC Directive 89/336/EEC, and carries the CE marking accordingly.
1.
The product was tested in a typical configuration with HP Personal Computer Systems and
peripherals.
2.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
●
This device may not cause harmful interference.
●
This device must accept any interference received, including interference that may cause
undesired operation.
3.
The product is assigned a Regulatory Model Number which stays with the regulatory aspect of the
design. The Regulatory Model Number is the main product identifier in the regulatory
documentation and test reports; this number should not be confused with the marketing name or
the product numbers.
Josep-Maria Pujol
Hardware Quality Manager
Sant Cugat del Vallès (Barcelona)
June 12th, 2006
Local contacts for regulatory topics only
Contact in Europe: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Böblingen,
Germany.
Contact in the USA: Hewlett-Packard Company, HPCC, 20555 S.H. 249 Houston, Texas 77070, USA.
Contact in Australia: Hewlett-Packard Australia Ltd, Product Regulations Manager, 31–41 Joseph
Street, Blackburn, Victoria 3130, Australia.
ENWW
Regulatory notices
29
Legal inf
ormat
ion