HP ProLiant WS460c Gen8 Graphics Server Blade - Manual (Page 22)

Operations 22
pass-through mezzanine card is used. Retain unused stabilizer/coupler for future use with possible
configuration changes.
6. Disconnect the power cable from the upper mezzanine card (1), and then disconnect the other end of
the power cable (2).
7. Disconnect the signal cable from the lower mezzanine cards:
a. Apply pressure to the lower mezzanine card (1), squeeze the latch (2), and then disconnect the
signal cable from the lower mezzanine card (3).
b. Disconnect the other end of the signal cable (4).