HP ProLiant WS460c Gen8 Graphics Server Blade - Manual (Page 27)

Operations 27
6. Remove the graphics card from the bottom slot of the card cage.
7. Install the new graphics card to the bottom slot of the card cage.
8. Install the graphics card cover into the top slot of the card cage, connect any power cables to the
graphics card, and then tighten the retaining screws.
9. Reinstall the graphics card retainer, and then reinstall the entire PCIe card cage into the graphics
expansion blade chassis.
10. Reconnect the four PCIe/SAS cables.
11. Install the Graphics Expansion Blade PCIe card cage:
a. Carefully engage the PCIe card cage to the anchoring pins on the expansion blade enclosure.
b. Attach the two T-15 screws that secure the front of the PCIe card cage.
12. Install the Graphics Expansion Blade access panel.
13. Install the workstation blade into the enclosure.
14. Power up the workstation blade.
15. Download and install the latest drivers from the HP website ( http://www.hp.com ) or NVIDIA website
( http://www.nvidia.com/content/drivers/drivers.asp ).
For software installation information, see the Microsoft Windows on HP ProLiant WS460c Gen8
Workstation Blade with WS460c Graphics Expansion Blade Administrator Guide.