Scan troubleshooting, Scan fails – HP Photosmart C4435 All-in-One Printer User Manual
Page 142
For more information, see:
•
“Load full-size paper or small-size photo paper” on page 20
•
“Recommended papers for printing and copying” on page 18
Cause: You were trying to make a borderless copy without using photo paper.
Scan troubleshooting
Use this section to solve these scan problems:
•
•
•
Scan fails because of insufficient computer memory
•
•
Scanned image is incorrectly cropped
•
Scanned image has incorrect page layout
•
Scanned image shows dotted lines instead of text
•
•
•
The scan feature does not work
Scan halts
Solution: Turn off the product and then turn it back on. Turn off the computer and
then turn it back on.
If this does not work, try changing the scan to a lower resolution.
Cause: The computer system resources might have been low.
Scan fails
Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.
•
Solution 1: Turn on your computer
•
Solution 2: Connect your computer to the product with a standard USB cable
•
Solution 3: Install the HP Photosmart software
•
Solution 4: Start the HP Photosmart software
Solution 1: Turn on your computer
Solution: Turn on your computer.
Cause: The computer was not turned on.
If this did not solve the issue, try the next solution.
Scan troubleshooting
139
Trou
bles
ho
ot
ing