HP Virtual Connect Enterprise Manager Software - Manual (Page 29)

•
Maximum Link Connection
•
Maximum Link Connection Speed
•
Number of networks configured in the VC Domain
•
For each shared network uplink:
Uplink set name
•
•
Network port location
•
Speed/duplex mode
•
Connection mode
•
Number of VLANs tagged associated to the shared network uplinks
•
Number of shared networks configured in the VC Domain
•
For each VLAN-tagged associated to the shared network uplink:
Network name
•
•
Network state
•
VLAN ID
•
Native
•
Smart Link
•
Private network
•
Preferred Link Connection
•
Preferred Link Connection Speed
•
Maximum Link Connection
•
Maximum Link Connection Speed
•
For each Fibre Channel SAN Fabric:
Fabric name
•
•
If the VC Domain has firmware 2.1x and later:
•
Configuration speed
•
Fabric port location
•
Number of Fibre Channel SAN Fabrics configured in the VC Domain
To add an unconfigured VC Module to a VC Domain Group, the following items must be identical:
•
Interconnect bays location and model
•
Enclosure model
•
Uplinks of the network and Fibre Channel SAN Fabric
•
Power state of the VC Modules
Mixed Virtual Connect firmware versions and firmware compatibility in a VC Domain Group
VCEM enables firmware compatibility using current and future versions of Virtual Connect firmware. This
feature provides these benefits:
•
A single VC Domain Group can contain VC Domains running different firmware versions. The following
table shows the supported combinations of Virtual Connect firmware within a single VC Domain Group.
VC firmware mode 2.1x VC firmware mode 2.3x VC firmware mode 3.0x VC Domain Group
Yes
1
Yes
1
Yes VC Domain firmware 3.0x
Yes
2
Yes No VC Domain firmware 2.3x
Yes No No VC Domain firmware 2.1x
VC Domains 29