HP Identity Driven Manager Software Series - Manual (Page 152)

4-12
Using the Secure Access Wizard
Using Secure Access Wizard
Re-auth period - The re-authentication timeout (in seconds, default 0),
set to 0 to disable re-authentication. Valid values are 0-999999999.
Client limit - The maximum number of clients to allow on one port
simultaneously, default is 1
Quiet period - The period of time the switch does not try to acquire a
supplicant. Valid values are 0-65535, the default value is 60 sec.
Unauth-vid
- The VLAN to which the port is assigned when the user has
not been authorized by 802.1x authentication. Valid values are any
defined VLAN, the default value is VLAN 1.
Auth-vid - The VLAN to which the port is assigned when the user has
been authorized by 802.1x authentication. Valid values are any defined
VLAN, the default value is VLAN 1.
If a device does not support the selected setting, the value you set will
appear in the SAW display, but will not be configured on that device.
d. Click OK to save the advanced settings and close the window.
e. Click Next in the configuration window to continue to the
Authentication Servers step.
16. The Web-Auth Configuration window lets you select the RADIUS authen-
tication method to be applied in the secure access settings for Wireless
Services Modules (2.x or higher).
Figure 4-10. Secure Access Wizard, Web-Auth Configuration