HP Identity Driven Manager Software Series - Manual (Page 105)

3-41
Using Identity Driven Manager
Defining Access Policy Groups
Modifying an Access Policy Group
1. Click the
Access Policy Group
node in the IDM tree to display the
Access
Policy Groups tab.
2. Click on an Access Policy Group Name to select it.
3. Click the
Modify Policy Group
icon in the toolbar to display the
Modify Access
Policy Group window.
4. Modify the Rules as needed by selecting different options from the pull-
down menus for each field. (see page 3-16 for field definitions).
5. Click Ok to save your changes and close the window.
Click Cancel to close the window without saving the Access Policy Group
changes.
Deleting an Access Policy Group
1. Click the
Access Policy Group
node in the IDM tree to display the
Access
Policy Groups
tab.
2. Click on an
Access Policy Group Nam
e to select it.
3. Click the
Delete Policy Group
icon in the toolbar to delete the Access Policy
Group.
If Active Directory synchronization is enabled, a deleted Access Policy Group
will be recreated when IDM is resynchronized or detects a change to the
related Active Directory group unless you remove the Active Directory group
from the User Directory Settings.