Using secure access wizard – HP Identity Driven Manager Software Series User Manual
Page 143
4-3
Using the Secure Access Wizard
Using Secure Access Wizard
Using Secure Access Wizard
N O T E :
The following section provides instructions on using the Secure Access Wiz-
ard to configure access security settings on ProCurve devices that support
port-based user authentication using 802.1X, Web-Auth, or MAC-Auth. For a
more complete description of implementation of these user authentication
features, please refer to the Access and Security Guide for the switch. Switch
guides are available on the Web at:
1.
To launch the Secure Access Wizard, select the option from the Tools
menu on the global (PCM/IDM) toolbar.
This launches the Secure Access Wizard "Welcome"
Figure 4-1. Secure Access Wizard, Welcome display
When you first open the wizard, the
Load Settings
and
Load template
buttons are
disabled. Once you have created and saved an access control configuration,
these buttons will be enabled.
■
You can also launch the wizard by selecting a device in the PCM
Devices list and clicking the Secure Access Wizard button in the tab
toolbar, or
■
Right-click on a device node in the PCM navigation tree and select the
Secure Access Wizard option in the right-click menu.