HP OmniBook 800 Notebook PC User Manual

Page 58

Advertising
background image

58

•

For infrared printing from an MS-DOS program, run the program in an MS-DOS
window instead of in MS-DOS mode.

•

Make sure the infrared light path is not blocked.

•

Move the devices to within about 1/2 meter (1.5 feet).

•

Make sure Windows is running—infrared printing is supported only while
Windows is running.

•

Make sure the infrared printer is IrDA compatible.

•

Make sure you have not disabled IrDA support on your OmniBook.

If a parallel printer doesn’t print

•

In the Printers window, select the printer and make sure Work Offline is not
marked in the File menu.

•

Make sure the printer port and the audio port do not use the same interrupt
value.

If the left edge of printed output is missing

•

If the printer you’re using is a 600-dpi (dots per inch) printer, try selecting a
compatible printer driver for a 300-dpi printer. For example, for a 600-dpi
HP LaserJet printer, try using the HP LaserJet IIIsi driver (300-dpi). Certain
applications may not work properly with 600-dpi printers.

Memory Problems

If a message says you’re out of memory

To find out how much memory is in your OmniBook, run

OmniBook Tools.

•

Exit Windows, then type win to restart Windows. If this doesn’t fix the problem,
exit Windows and

reboot

the OmniBook.

Mouse Problems

If the pointer is difficult to control

•

Adjust the pointer settings using the Mouse icon in Control Panel.

If the OmniBook mouse doesn’t work

•

Make sure you don’t have an external mouse connected. If you do, you can still
return control to the OmniBook mouse by ignoring the external mouse:

In OmniBook Tools, click Input Devices.

•

If you just disconnected a serial mouse, you have to exit and restart Windows to
make the OmniBook mouse active again.

If the mouse doesn’t work in MS-DOS

•

Exit Program Manager (and Windows), then type mouse.

If a mouse connected to the serial port doesn’t work properly

Advertising