HP ProLiant DL365 G5 Server - Manual (Page 42)

Hardware options installation 42
3. Install the hot-plug hard drive.
4. Determine the status of the hot-plug hard drive by observing the drive LEDs (" SAS and SATA hard
drive LED combinations " on page 16 ).
5. Resume normal server operations.
Multibay device options
Several multibay devices can be installed in the server. For a list of supported multibay devices, refer to
the QuickSpecs on the HP website ( http://www.hp.com/support ).
To install the component:
1. Power down the server (on page 18 ).
NOTE: Access to the ejector button is intentionally restricted. To eject the optical device, push
the ejector button with a small flat object such as a key or pen.
2. Push the multibay drive ejector button to eject the device or blank.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.