Connecting the serial communications port, Connecting the usb communications port, Connecting the repo port – HP Tower Uninterruptible Power System User Manual
Page 21
Advertising
Installation 21
Connecting the serial communications port
CAUTION:
Use only the computer interface cable supplied with the UPS to connect the
communications port to the host computer.
IMPORTANT:
Power protector software requires the communications port to be appropriately
cabled to the host computer.
Connecting the USB communications port
Connecting the REPO port
WARNING:
The pins on the REPO port are polarity sensitive. Be sure to verify polarity while
connecting the REPO port.
Advertising