HP XP Racks - Manual (Page 40)

Selected Source Volume table
•
Table
Description Item
Selected LDEV's identifier LDEV ID
Selected LDEV's name LDEV Name
ID for the parity group. They are hyphenated numbers. A number before the hyphen
shows the frame number and a number after the hyphen shows the group number. Parity Group ID
Pool name and ID number. Pool Name (ID)
The pool capacity: Pool Capacity
◦
Total: The total pool capacity.
◦
Used: The amount of pool capacity that is used.
◦
Remaining: The amount of pool capacity that is not used.
The RAID level of the source volume. RAID Level
The emulation type of the source volume. Emulation Type
The source volume's capacity. Capacity
◦
Total: The total source volume capacity.
◦
Used: The amount of source capacity that is used.
Provisioning type of the LDEV: Provisioning Type
◦
Basic: Internal volume
◦
External: External volume
◦
THP: THP volume
◦
External MF: External mainframe volume
Displays the data drive type and RPM of the pool. Drive Type/RPM
Indicates the number and name of the CLPR corresponding to the parity group. CLPR
•
Button
Description Item
When clicked, the Select Source Volume window displays. Select
Provisioning Type
Provisioning type of the LDEV, which can be set as the target volume:
•
Basic: Internal volume
•
External: External volume
•
Thin Provisioning: THP volume
•
External MF: External mainframe volume
40 Auto LUN GUI reference