HP Color LaserJet CM1015CM1017 Multifunction Printer series - Manual (Page 116)

Use the control panel
● Network configuration page
● Configuration page
● IP configuration
● Link speed settings
Network configuration page
The Network configuration page lists the current network settings and other MFP properties. To print
the Network configuration page from the MFP:
1. On the control panel, press Menu .
2. Press the navigation arrows to select Reports, then press OK .
3. Press the navigation arrows to select Network report, then press OK .
Configuration page
The Configuration page lists the current MFP settings and properties. It is possible to print a
Configuration page from the MFP or HP ToolboxFX. To print the Configuration page from the MFP:
1. On the control panel, press Menu .
2. Press the navigation arrows to select Reports, then press OK .
3. Press the navigation arrows to select Configuration report, then press OK .
IP configuration
It is possible to configure the IP address manually or automatically.
Manually configure a static IP address
CAUTION Do not assign identical TCP/IP addresses to two network devices on the same
network.
To manually configure a static IP address from the control panel:
1. On the control panel, press Menu
2. Press the navigation arrows to select Network config.
3. Press OK .
4. Press the navigation arrows to select the TCP/IP configuration menu.
5. Press OK .
6. Press the navigation arrows to select Manual.
7. Press and hold OK .
8. Press Left arrow or Right arrow to decrement or increment each triplet value.
102 Chapter 11 Network Setup and Administration (HP Color LaserJet CM1017 MFP) ENWW