HP Officejet Pro 1150cse All-in-One Printer - Manual (Page 17)

1-12 Setting Up Your New HP OfficeJet Pro 1150C
6 Connect the Power Cord
1
Turn off your computer.
IMPORTANT
Use the cable that was shipped with your product. It is a specialized IEEE-1284
parallel cable that is necessary for the proper functioning of your HP OfficeJet Pro
1150C.
2
Connect the printer cable to HP OfficeJet Pro 1150C, snapping both clips
into the notches. (The connector is located on the left side toward the back
of the product.)
3
Plug the other end of the cable into the computer’s parallel port and tighten
the screws. Do not use a switch box or the pass-through port of another
parallel port product such as a scanner, data/tape drive, or CD-ROM drive.
CAUTION Connecting your HP OfficeJet Pro 1150C to a switch box or the pass-through
port of another parallel product can cause erratic behavior of both products and
the possible loss of information.