HP Officejet Pro 1150cse All-in-One Printer - Manual (Page 19)

1-14 Setting Up Your New HP OfficeJet Pro 1150C
7 Install the Software
NOTE
Do not turn on the computer.
You need to install software for the HP OfficeJet Pro 1150C to work with
your computer. If your HP OfficeJet Pro 1150C came with a CD-ROM set
and diskettes, use the CD-R
use the CD-R use the CD-R use the CD-R use the CD-ROM set OM set OM set OM set OM set for installation for installation for installation for installation for installation, if at all possible.
If your HP OfficeJet Pro 1150C came with a two-disk CD-ROM set, all
your software will be installed in a single installation procedure. The two-
disk CD-ROM set includes the following software:
✦ HP OfficeJet Pro 1150C printer software needed for printing
and scanning
✦ FontSmart font utility software
✦ Caere OmniPage Limited Edition text recognition software (also known
as optical character recognition (OCR) software)
✦ Adobe PhotoDeluxe image editing software on the second CD-ROM
Keep the second CD-ROM near your computer, because you’ll need to have
it in your CD-ROM drive when using the Adobe PhotoDeluxe software
templates.
IMPORTANT
As part of the software installation process, a test is performed to confirm
communication between your PC and the HP OfficeJet Pro 1150C. Results of
the test will be presented on your PC monitor. If the bidirectional communica-
tion test fails, it is highly recommended you read important information about
bidirectional communication and ECP in the ECP document that is located in
your HP OfficeJet Pro Utilities program group/folder.
If bidirectional communication is not established during the communications
test, you must manually set the front panel language and paper size. Refer to
“Change the Front Panel Language” in Chapter 2.