Axis Communications CD E100 - Manual (Page 38)

Section 3: Microsoft & IBM Networks (SMB)
38 AXIS StorPoint CD E100 User’s Manual
Note:
❏ If you cannot find the StorPoint CD, enter
\\AXIS<nnnnnn>\root
, in the
Path box and click OK.
4. From the bottom listing, select one of the StorPoint CD resources:
• Root for root level access
• Volumes for access to all the discs
• the volume name for access to an individual disc, e.g. office
5. Select a drive letter.
6. Check Reconnect at Startup if you wish to use the resource under the same
drive letter the next time you start your computer.
7. Click OK. The StorPoint CD is ready for use.
Windows NT 3.51 On Windows NT 3.51 on an SMB client, follow these steps:
1. Start the File Manager.
2. From the Disk menu, select Connect Network Drive…
3. In the listing, double click the entry for your new StorPoint CD. The default
name is AXIS<nnnnnn>, where <nnnnnn> are the six last digits of the
StorPoint CD serial number.
4. To connect a StorPoint CD resource, select:
• Root for root level access
• Volumes for access to all the discs
• the volume name for access to an individual disc, e.g. office
5. Select a drive letter for your StorPoint CD.
6. Check Reconnect at Logon if you wish to use the resource under the same drive
letter the next time you start your computer.
7. If you wish to connect using a different user name, enter the name in the
Connect As box. Otherwise, leave the box empty.
Click OK. The StorPoint CD is now ready for use.