HP Insight Management Agents - Manual (Page 91)

•
Serial Number—Displays the unit serial number for the library. It can be used for identification
purposes.
•
Firmware Version—Displays the firmware revision level of the tape library as returned by the
SCSI inquiry command.
•
Service Hours—Displays the number of hours in service.
•
Total Moves—Displays the total number of moves.
•
Door Status—Displays the tape library door status. The following values are valid:
Open—Indicates that the tape library door is open. ◦
◦ Closed—Indicates that the tape library is closed.
◦ Not supported—Indicates that the tape library does not detect or report door status.
◦ Unknown—The door status of the tape library cannot be determined. Ensure the latest
drivers and Storage Agents are installed.
•
Temperature—Displays the tape library temperature status. The following values are valid:
OK—Indicates that the temperature of the library is within normal operating limits. ◦
◦ Safe Temperature Exceeded—Indicates that the temperature of the library has exceeded
the safe operational temperature. The library continues to operate under this warning.
◦ Maximum Temperature Exceeded—Indicates that the temperature of the library has
exceeded the normal operating limits to the extent that the library might no longer function.
◦ Not supported—Indicates that the library cannot detect or report the temperature status.
◦ Unknown—The temperature status of the tape library cannot be determined. Ensure the
latest drivers and Storage Agents are installed.
•
Redundancy—Displays the tape library redundancy status, which denotes the presence of
internal redundant components, such as fans, power supplies, etc. The following values are
valid:
◦ Active—Indicates that the library is capable of detecting and reporting redundant
components, there are enough redundant units already installed, and the redundancy is
active.
◦
Capable—Indicates that the library is capable of detecting and reporting redundant
components but there are not enough redundant units installed to make redundancy active.
◦ Not capable—Indicates that the library is capable of detecting and reporting redundant
components but there are no components that support redundancy.
◦ Not supported—Indicates that the library cannot detect or report redundancy status.
◦ Unknown—The redundancy status of the tape library cannot be determined. Ensure the
latest drivers and Storage Agents are installed.
•
Hot Swap—Displays the tape library hot swap status which denotes the presence of hot
swappable internal components, such as drives, fans, power supplies, etc. The following
values are valid:
◦ Capable—Indicates that the library is capable of detecting and reporting hot-swappable
internal components and has at least one hot-swappable component.
◦ Not capable—Indicates that the library is capable of detecting and reporting hot
swappable internal components but there are no hot-swappable components installed.
Storage agent 91