HP Color LaserJet 5500 Printer series - Manual (Page 41)

Configure device menu
The configure device menu allows you to change or reset the default print settings, adjust the
print quality, and change the system configuration and I/O options.
Printing menu
These settings affect only jobs without identified properties. Most jobs identify all of the
properties and override the values set from this menu. This menu can also be used to
set default paper size and type.
Menu item Values Description
COPIES 1 - 32000 Allows you to set the default
number of copies.
DEFAULT PAPER SIZE A list of available sizes appears. Allows you to set the default
paper size.
DEFAULT CUSTOM PAPER
SIZE UNIT OF MEASURE
X DIMENSION Y DIMENSION Allows you to set the default size
for any job without dimensions.
DUPLEX OFF
ON Allows you to enable or disable
the duplex function on models
with duplexing capability.
OVERRIDE A4/LETTER NO
YES Allows you to set the printer to
print an A4 job on letter-size
paper when no A4 paper is
loaded, a letter-size job when
no A4-size paper is loaded, an
A3 job on 11 by 17-size paper
when no A3 paper is loaded,
and a 11 by 17-size job on A3
paper when no 11 by 17-size
paper is loaded.
MANUAL FEED ON
OFF Allows you to manually feed
paper.
COURIER FONT REGULAR
DARK Allows you to select a version of
the Courier font.
WIDE A4 NO
YES Allows you to change the
printable area of A4 paper so
that eighty 10-pitch characters
may be printed on a single line.
EN_WW Configure device menu 31