HP Storage Mirroring Software - Manual (Page 26)

24 of 118
Report Information displayed
Storage
Mirroring
transmission
●
Server—Name of the Storage Mirroring server
●
Source—The name of the source server
●
Target—The name of the target server
●
Source IP Address—The address of the source server
●
Target IP Address—The address of the target server
●
Transmit Rate—Calculated by dividing the difference in bytes
transmitted between reports by the difference in time between
reports
●
Transferred—Amount of compressed data moved from source
●
Transmitted—Amount of uncompressed data transmitted from
source
Configuration reports
Storage Mirroring server configuration
The Storage Mirroring Server Configuration report displays information about the
configuration of a Storage Mirroring server.
To run the Storage Mirroring Server Configuration report, select a Storage Mirroring
server in the tree. Right-click and select Configuration Reports, Server from the menu.
The following information is returned by this report:
●
Server—The hostname of the Storage Mirroring server
●
IP Address—The IP address of the host running the Storage Mirroring server
●
Version—The version of Storage Mirroring running on the server
●
Activation Code—The Activation Code used by the server
●
Memory Limit—The Amount of Windows system memory that will trigger queuing
to disk
●
Disk Limit—The maximum amount of disk space that Storage Mirroring will use.
This field is only displayed if the disk limit is configured in Storage Mirroring
Note: The value -1 will display when the limit is set to unlimited.
●
Min Free Disk—The minimum free disk space that Storage Mirroring will observe
●
Email Enabled—If selected, email notifications are enabled on the server
●
Failover Enabled—If selected, failover is enabled on the server
Storage Mirroring server connections