HP XP P9500 Storage - Manual (Page 115)

Executed command Description Operation overview Step
raidcom add ldev -parity_grp_id
<gno-sgno> -ldev_id <ldev#> {-capacity Specify a parity group and create LDEV. Creating LDEV 7
<size> | -offset_capacity <size> | -cylinder
<size>} [-emulation <emulation
type>][-location <lba>] [-mp_blade_id
<mp#>]
raidcom initialize ldev -ldev_id <ldev#>
-operation <type> Format created LDEV. Formatting LDEV 8
raidcom modify ldev -ldev_id <ldev#>
-ldev_name <ldev naming> Create nickname for LDEV.
This operation is arbitrary.
Creating LDEV
nickname (arbitrary) 9
raidcom modify ldev -ldev_id <ldev#>
-mp_blade_id <mp#> Set MP blade of created LDEV. Setting MP blade of
LDEV 10
raidcom get ldev -ldev_id <ldev#> … [-cnt
<count>] [-key <keyword>] Display information of created LDEV and
confirm the result of executing the
command. Displaying LDEV
information 11
raidcom add thp_pool {{-pool_id <pool
ID#> [-pool_name <pool naming>] | Create pool (for Thin Provisioning). Creating pool (for
Thin Provisioning) 12
-pool_name <pool naming>[-pool_id <pool
ID#>]} | -pool_id <pool ID#> -pool_name
<pool naming>}} -ldev_id <ldev#> …[-cnt
<count>] [-user_threshold <threshold_1>
[<threshold_2>]]
raidcom add ldev -pool {<pool ID#> |
<pool naming> | snap} -ldev_id <ldev#> Specify pool and create an LDEV(V-VOL). Creating LDEV
(V-VOL) 13
{-capacity <size> | -offset_capacity <size>
| -cylinder <size>} [-emulation <emulation
type>][-location <lba>] [-mp_blade_id
<mp#>]
raidcom modify ldev -ldev_id <ldev#>
-ldev_name <ldev naming> Create nickname for the created LDEV.
This operation is arbitrary.
Creating LDEV
(V-VOL) nickname
(arbitrary) 14
raidcom modify ldev -ldev_id <ldev#>
-mp_blade_id <mp#> Set MP blade of created LDEV (V-VOL). Setting MP blade of
LDEV (V-VOL) 15
raidcom get ldev -ldev_id <ldev#> … [-cnt
<count>] [-key <keyword>] Display information of created LDEV
(V-VOL) and confirm the result of executing
the command. Displaying LDEV
information (V-VOL) 16
raidcom add lun -port <port> [host group
name] -ldev_id <ldev#> [-lun_id <lun#>] Specify port, map LDEV to LUN and create
an LU path. Creating LU path 17
raidcom get lun -port <port> [<host group
name>] Display LU path information and confirm
the result of executing the command. Displaying LU path
information 18
Virtual volume (Thin Provisioning) operations 115