HP XP P9500 Storage - Manual (Page 99)

Corresponding command Description Operation type
raidcom unlock resource -resource_name <resource group name
> Unlock resource.
raidcom get resource Display resource group
information.
raidcom add resource -resource_name <resource group name>
[-resource_id <resource group_id > |-ldev_id <ldev#> | -port Add resource group.
<port#> | -port <port#> <host group name> | -parity_grp_id
<gno-sgno> | -external_grp_id <gno-sgno>]
raidcom delete resource -resource_name <resource group name>
[-ldev_id <ldev#> | -port <port#> | -port <port#> <host group Delete resource group.
name> | -parity_grp_id <gno-sgno> | -external_grp_id
<gno-sgno>]
raidcom add host_grp -port <port> -host_grp_name <host group
name> Create host group. Host
(see the Provisioning Guide
for the storage system)
raidcom modify host_grp -port <port> [<host group name>]
-host_mode < host mode> [-host_mode_opt <host mode option>
… ] Set host mode.
raidcom add hba_wwn -port <port> [<host group name>]
-hba_wwn <WWN strings> Register a host to host group.
raidcom delete host_grp -port <port> [<host group name>] Delete host group.
raidcom get host_grp -port <port> [<host group name>] Display host group information.
raidcom modify port -port <port>{[-port_speed <value>]
[-loop_id<value>] [-topology <topology>] [-security_switch < y/n
>]} Set port. Port
(see the Provisioning Guide
for the storage system)
raidcom modify port -port <port> -port_attribute <port attribute> Set port attribute.
raidcom get port [-port <port>] Display port information.
raidcom add ldev {-parity_grp_id <gno-sgno> | - external_grp_id
<gno-sgno> | -pool {<pool ID#> | <pool naming> | snap}} Create LDEV. Internal volume
(see the Provisioning Guide
for the storage system)
-ldev_id <ldev#> {-capacity <size> | -offset_capacity <size> |
-cylinder <size>} [-emulation <emulation type>][-location <lba>]
[-mp_blade_id <mp#>]
raidcom get ldev {-ldev_id <ldev#> … [-cnt <count>] | -grp_opt
<group option> -device_grp_name <device group name> [<device
name>]} [-key <keyword>] Display LDEV information.
raidcom get parity_grp [-parity_grp_id <gno-sgno>] Display parity group
information.
raidcom add ssid -rcu <serial#> <mcu#> <rcu#> <id> -ssid <ssid> Define SSID.
raidcom delete ssid -rcu <serial#> <mcu#> <rcu#> -ssid <ssid>
raidcom add thp_pool {{-pool_id <pool ID#> [-pool_name <pool
naming>] | -pool_name <pool naming>[-pool_id <pool ID#>]} | Create pool for Thin Provisioning
or Thin Provisioning for
Mainframe. Virtual volume
(Thin Provisioning, Thin
Provisioning for
-pool_id <pool ID#> -pool_name <pool naming>}} {-ldev_id
<ldev#> …[-cnt<count>] | -grp_opt <group option>
Mainframe, Smart Tiers,
Snapshot)
-device_grp_name <device group name> [<device
name>]}[-user_threshold <threshold_1> [<threshold_2>] ]
(see the Provisioning Guide
for the storage system)
raidcom add snap_pool {{-pool_id <pool ID#> [-pool_name <pool
naming>] | -pool_name <pool naming>[-pool_id <pool ID#>]} | Create pool for Snapshot.
-pool_id <pool ID#> -pool_name <pool naming>}} {-ldev_id
<ldev#> …[-cnt<count>] | -grp_opt <group option>
-device_grp_name <device group name> [<device
name>]}[-user_threshold <%> ]
Available provisioning operations 99