HP XP P9500 Storage - Manual (Page 70)

Check the operation for Host group
raidcom get host_grp -port <port> -store <work file>
After acquiring the configuration information, execute the script by specifying the configuration
file.
raidcom -zt <created script file name> -load <work file>
Resource location and parameter
MP blade location and parameter
To specify MP blade IDs by the raidcom add ldev command, specify the following IDs.
Table 19 MP blade names and parameters for P9500
MP blade ID MP blade number MP blade name
0 0 MPB-1MA
1 1 MPB-1MB
2 2 MPB-2MC
3 3 MPB-2MD
4 4 MPB-1ME
5 5 MPB-1MF
6 6 MPB-2MG
7 7 MPB-2MH
LDEV grouping function
The LDEV grouping function can create a group of multiple LDEVs (device group function and copy
group function).
Overview
RAID Manager can be used to create a group of multiple LDEVs by defining copy groups, which
are a group of copy pairs. This is accomplished in both the primary and secondary configuration
definition files by defining the group names of the combined LDEVs (dev_name of HORCM_DEV
or HORCM_LDEV).
To change copy group information, modify the primary and secondary configuration definition
files. For example, to change the LDEV configuration of copy group dbA (see following figure),
change the LDEV information in configuration definition files A and B.
70 RAID Manager functions on the P9500