HP XP P9500 Storage - Manual (Page 98)

Table 26 Asynchronous commands of the configuration setting command (continued)
Command syntax Function
raidcom add rcu_path -cu_free <serial#> <id> <pid> -mcu_port <port> -rcu_port
<port> RCU logical path addition
raidcom delete rcu -cu_free <serial#> <id> <pid> RCU deletion
raidcom delete rcu_path -cu_free <serial#> <id> <pid> -mcu_port <port> -rcu_port
<port> RCU logical path deletion
raidcom add journal -journal_id <journal ID#> {-ldev_id <ldev#> …[-cnt <count>]
| -grp_opt <group option> -device_grp_name <device group name> [<device
name>]} Creating journal/ Registering journal volume
the journal
raidcom delete journal -journal_id <journal ID#> [-ldev_id <ldev#> | -grp_opt
<group option> -device_grp_name <device group name> [<device name>]] Deleting journal/ Deleting journal volume
from the journal
raidcom check_ext_storage path -path_grp <path group#> -port <port>
-external_wwn <wwn strings> Restoration of path for the external path.
raidcom add path -path_grp <path group#> -port <port> -external_wwn <wwn
strings> Setting the external path
raidcom add external_grp -path_grp <path group#> -external_grp_id <gno-sgno>
-port <port> -external_wwn <wwn strings> -lun_id <lun#> [-emulation <emulation
type>] Mapping the external volume
raidcom delete path -path_grp <path group#> -port <port> -external_wwn <wwn
strings> Deleting the external path
raidcom delete external_grp -external_grp_id <gno-sgno> Releasing the mapping of external volume
raidcom disconnect path -path_grp <path group#> -port <port> -external_wwn
<wwn strings> Stopping the use of paths to the external
volume
Help on configuration setting commands
To see the configuration setting command help, execute any command using the -h option, for
example, raidcom - h.
raidcom -h
LDEV nickname function
As a function of configuration setting command, a nickname can be set for each LDEV.
The details of the definition for the LDEV nickname function are shown below.
The maximum length of a name is 32 characters. For one LDEV, one nickname can be defined.
A nickname can be defined as follows:
raidcom modify ldev -ldev_id <ldev#> -ldev_name <ldev naming>
Available provisioning operations
The following provisioning operations can be performed using RAID Manager.
Corresponding command Description Operation type
raidcom -login <user_name> <password> Log in. Login and logout
raidcom -logout Log out.
raidcom lock resource -resource_name <resource group name >
[-time <time(sec)>] Lock resource. Resource
98 Provisioning operations with RAID Manager