HP NonStop G-Series - Manual (Page 53)

WARNING
If Save Service is not selected before selecting Back, the parameters are not saved as part of the service
Select Back to return to the previous window. 7.
Selecting CARRAY or STRING as a Parameter Data Type
If CARRAY or STRING is the selected buffer type for a new service, only carray or string can be added as the data type for the
accompanying parameters of a service.
In this case, only one parameter can be added. It is recommended that the parameter name for CARRAY is "CARRAY" and the
parameter name for STRING is "STRING."
See also Adding a Service Instructions and Selecting CARRAY or STRING as a Service Buffer Type . For more information, refer to
Section 6, Using the Jolt Class Library
Figure 5-10 is an example of the Edit Parameters window with string as the selected data type for the parameter. The Type defaults to
string and does not allow you to modify that particular data type. The Field Name can be any name.
Figure 5-10. Edit Parameters Window with STRING as the Data Type