Option for two-sided printing cannot be selected – HP Deskjet 6620 Color Inkjet Printer User Manual
Page 160
5. Tilt the Small Paper Tray forward and open the lower door of the accessory.
1. Tilt the Small Paper Tray
2. Open the lower door
6. Remove any paper that is inside the accessory.
7. Close the accessory, and then secure the back lever to close the accessory.
8. Re-attach the accessory to the printer.
Option for two-sided printing cannot be selected
The printer driver cannot sense the duplexer until a print job is sent to the printer.
Print a single sided document, and then print the two-sided document. The option
for using the duplexer will appear in the printer software.
If the option for the duplexer still does not appear, then verify that the following
conditions exist:
• The duplexer is attached to the printer.
• The duplexer is
• The media type and size selected on the Paper/Quality tab are supported by
the duplexer.
HP Deskjet 6600 series printer
160