HP MPX200 Multifunction Router - Manual (Page 10)

2 Getting started
This chapter provides information about supported configurations, and hardware and software
setup for using DMS with MPX200 and the HP mpx Manager.
Supported configurations
This section describes and illustrates the supported topologies (direct attach, fabric, and multipath),
and lists the supported fabric and array types.
Supported topologies
Supported topologies include fabric and multipath configurations.
Fabric configuration
Figure 1 (page 10) and Figure 2 (page 10) show typical setups for data migration with a dual-fabric,
HA configuration with both array controller ports and one port from each MPX200 blade connected
to each fabric. This configuration enables the MPX200 to perform load balancing.
Figure 1 Single-blade high availability setup
Figure 2 Dual-blade high availability setup
10 Getting started