HP USB 2.0 2005pr Port Replicator - Manual (Page 19)

4 Troubleshooting
Solving common problems
The following tables list possible problems and the recommended solutions.
General use and connection problems
Problem Possible cause Solution
The power light is off. The port replicator is not connected to
AC power. Connect the power cord to the port
replicator and to an electrical outlet.
The ports or jacks on the port replicator
are not working. The port replicator is not connected to
AC power. Connect the power cord to the port
replicator and to an electrical outlet.
The port replicator is not connected to
the computer correctly. Disconnect the USB cable from the
computer, and then reconnect it.
Solving common problems 15