HP USB 2.0 2005pr Port Replicator - Manual (Page 8)

Setting up the USB port replicator
Step 1: Connecting to AC power
WARNING! To reduce the risk of electric shock or damage to your equipment:
Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
1. Connect the AC adapter to the power connector (1) on the port replicator.
2. Connect the power cord to the AC adapter (2).
3. Connect the other end of the power cord to an electrical outlet (3).
4 Chapter 1 Getting started