HP ZBook 15 Mobile Workstation - Manual (Page 51)

Installing a hard drive
To install a hard drive:
1. Angle the hard drive (1) into the hard drive bay, and then lower the hard drive into the hard drive
bay.
2. Pull the plastic tab (2) toward the center of the computer to engage the hard drive with the
connector.
3. Tighten the hard drive screws (3).
4. Replace the service cover (see Removing or replacing the service cover on page 37 ).
5. Replace the battery (see Inserting or removing the battery on page 31 ).
6. Connect AC power and external devices to the computer.
7. Turn on the computer.
Replacing or upgrading the hard drive 41