Configuring an expresscard, Inserting an expresscard – HP ZBook 15 Mobile Workstation User Manual
Page 55
![background image](/manuals/398350/55/background.png)
Configuring an ExpressCard
Install only the software required for the card. If you are instructed by the ExpressCard manufacturer
to install device drivers:
●
Install only the device drivers for your operating system.
●
Support for ExpressCards is included in the operating system. Only install additional software if
required. If in doubt, check with the vendor or contact HP support.
Inserting an ExpressCard
CAUTION:
To prevent damage to the computer and external media cards, do not insert a PC Card
into an ExpressCard slot.
CAUTION:
To reduce the risk of damage to the connectors:
Use minimal force when inserting an ExpressCard.
Do not move or transport the computer when an ExpressCard is in use. ExpressCard is a network
device, shut down the ExpressCard before removing it from your computer.
NOTE:
The following illustration may look slightly different than your device.
The ExpressCard slot may contain a protective insert. To remove the insert:
1.
Press in on the insert (1) to unlock it.
2.
Pull the insert out of the slot (2).
To insert an ExpressCard:
1.
Hold the card label-side up, with the connectors facing the computer.
Using ExpressCards (select models only)
45