HP ProLiant SL230s Gen8 Server - Manual (Page 45)

Hardware options installation 45
— Right node
14. Install the server into the chassis (" Installing the server into the chassis " on page 25 ).
15. Install hot-plug drives into the drive cages (" Installing a hot-plug drive " on page 38 ).
16. Power up the server (on page 15 ).
Installing a quick-release drive
1. Power down the server (on page 15 ).
2. Remove the server from the chassis (on page 15 ).
3. Remove the drive air baffle (on page 16 ).
4. If not installed, install the appropriate quick-release drive cage option:
o LFF quick-release drive cage (" Installing an LFF quick-release drive cage " on page 46 )
o SFF quick-release drive cage (" Installing an SFF quick-release drive cage " on page 49 )
5. Install the quick-release drive: