Use the scanner, Load originals, Document loading tips – HP Scanjet Enterprise Flow 7000 s2 Sheet-feed Scanner User Manual
Page 15: 2 use the scanner
2 Use the scanner
The following topics describe how to load and scan originals.
●
●
Load originals
●
●
●
Load cards into the document feeder
Document loading tips
●
The maximum capacity of the document feeder is 50 sheets of 75 g/m
2
(20 lb) paper. When
using heavier paper, the maximum capacity is decreased.
●
The maximum card capacity, for card stock up to 15 points, is approximately 9–10 cards.
●
Be sure that your documents are within these guidelines:
Width:
52 mm to 220 mm (2.1 in to 8.7 in)
Length:
74 mm to 3100 mm (2.9 in to 122 in)
Weight:
41 g/m
2
to 209 g/m
2
(11 lb to 56 lb)
●
Use the Auto detect size setting for page size, or set the page size to match the width and
length of the page that you are scanning.
●
The scanner document feeder can process cards that meet the following specifications:
Minimum size:
52 mm x 74 mm (2.1 in x 2.9 in)
Maximum size:
210 mm x 269 mm (8.3 in x 10.6 in)
Minimum weight:
253 g/m
2
(12 points or 102 lb)
Maximum weight:
326 g/m
2
(15 points or 120 lb)
●
Scanning the following types of documents might result in paper jams or damage to the
documents.
Wrinkled or creased documents
Curled documents
ENWW
Load originals
9