Fax quality is poor – HP LaserJet Pro MFP M127fw User Manual
Page 114
LCD control panel
Touchscreen control panel
1.
On the product control panel, press the Setup button.
2.
Select Fax Setup, and then select All Faxes.
3.
Select Fax Speed, and then select the correct setting.
1.
From the Home screen on the product control panel,
touch the Setup
button.
2.
Select
Fax Setup
, and then select
Advanced Setup
.
3.
Select
Fax Speed
, and then select the correct setting.
●
Change the fax settings on the control panel to a lower resolution.
NOTE:
Higher resolution faxes can take longer to send than lower resolution faxes.
LCD control panel
Touchscreen control panel
1.
On the product control panel, press the Setup button.
2.
Select Fax Setup, and then select Fax Send Setup.
3.
Select Def. Resolution, and then select the correct
setting.
1.
From the Home screen on the product control panel,
touch the Setup
button.
2.
Select
Fax Setup
, and then select
Advanced Setup
.
3.
Select
Fax Resolution
, and then select the correct
setting.
Fax quality is poor
Fax is blurry or too light.
●
Increase fax resolution when sending faxes. Resolution does not affect received faxes.
LCD control panel
Touchscreen control panel
1.
On the product control panel, press the Setup button.
2.
Select Fax Setup, and then select Fax Send Setup.
3.
Select Def. Resolution, and then select the correct
setting.
1.
From the Home screen on the product control panel,
touch the Setup
button.
2.
Select
Fax Setup
, and then select
Advanced Setup
.
3.
Select
Fax Resolution
, and then select the correct
setting.
NOTE:
Increasing resolution slows transmission speed.
●
Turn on the
Error Correction
setting from the control panel.
LCD control panel
Touchscreen control panel
1.
On the product control panel, press the Setup button.
2.
Select Fax Setup, and then select All Faxes.
3.
Select Error Correction, and then select On.
1.
From the Home screen on the product control panel,
touch the Setup
button.
2.
Select
Service
, and then select
Fax Service
.
3.
Select
Error Correction
, and then select
On
.
●
Check the toner cartridges and replace the cartridge if necessary.
●
Ask the sender to darken the contrast setting on the sending fax machine, and then resend the fax.
106 Chapter 8 Solve problems
ENWW