HP LaserJet Pro MFP M127fw User Manual
Page 57
4.
Make sure that the On option is selected.
With this setting turned on, you can alert the product to pick up the incoming fax call by pressing 1-2-3
sequentially on the telephone keypad. Turn this setting off only if you use pulse dialing or if you have a
service from your telephone company that also uses the 1-2-3 sequence. The telephone company
service does not work if it conflicts with the product.
5.
Press the Back button to return to the Fax Recv. Setup menu.
6.
Select Answer Mode.
7.
Select Fax/Tel, and then press the
OK
button.
With this setting, the product automatically picks up all calls and determines if the call is a voice or fax
call. If the call is a fax call, the product handles the call as an incoming fax. If the incoming call is
detected as a voice call, the product generates an audible synthesized ring to alert you of an incoming
voice call.
8.
Press the Back button to return to the Fax Recv. Setup menu.
9.
Select Fax/Tel Ring Time.
10.
Select the number of seconds after which the product should stop sounding the Fax/Tel audible ring to
notify you of an incoming voice call, and then press the
OK
button.
Touchscreen control panel
1.
From the Home screen on the product control panel, select Setup .
2.
Select
Fax Setup
, and then select
Advanced Setup
.
3.
Select
Extension Phone
.
4.
Make sure that the
On
option is selected.
With this setting turned on, you can alert the product to pick up the incoming fax call by pressing 1-2-3
sequentially on the telephone keypad. Turn this setting off only if you use pulse dialing or if you have a
service from your telephone company that also uses the 1-2-3 sequence. The telephone company
service does not work if it conflicts with the product.
5.
Select Back twice to return to the
Fax Setup
menu.
6.
Select
Basic Setup
, and then select
Answer Mode
.
7.
Select
Fax/Tel
.
With this setting, the product automatically picks up all calls and determines if the call is a voice or fax
call. If the call is a fax call, the product handles the call as an incoming fax. If the incoming call is
detected as a voice call, the product generates an audible synthesized ring to alert you of an incoming
voice call.
8.
Select Back twice to return to the
Fax Setup
menu.
9.
Select
Advanced Setup
, and then select
Fax/Tel Ring Time
.
10.
Select the number of seconds after which the product should stop sounding the Fax/Tel audible ring to
notify you of an incoming voice call.
ENWW
Connect and configure the product for fax
49