HP USB 3.0 3005pr Port Replicator - Manual (Page 8)

Setting up the USB port replicator
Step 1: Connecting to AC power
WARNING! To reduce the risk of electric shock or damage to your equipment:
Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
To ensure the correct performance of all port replicator features, connect the port replicator to an AC
power source using the port replicator power cord.
1. Connect the AC adapter to the power connector (1).
2. Connect one end of the power cord to the AC adapter (2), and connect the other end of the
power cord to an electrical outlet (3). The power light (4) on the top of the port replicator turns
on.
4 Chapter 1 Getting started