HP LaserJet M1319f Multifunction Printer User Manual
Page 106
Make an extension telephone available to receive faxes
With this setting turned on, you can alert the product to pick up the incoming fax call by pressing 1-2-3
sequentially on the telephone keypad. The default setting is On. Turn this setting off only if you use
pulse dialing or if you have a service from your telephone company that also uses the 1-2-3 sequence.
The telephone company service does not work if it conflicts with the product.
1.
On the control panel, press
Setup
.
2.
Use the arrow buttons to select Fax setup, and then press
OK
.
3.
Use the arrow buttons to select Fax Recv. setup, and then press
OK
.
4.
Use the arrow buttons to select Extension Phone, and then press
OK
.
5.
Use the arrow buttons to select On or Off, and then press
OK
to save the selection.
96
Chapter 10 Fax
ENWW