Clean the exterior, Firmware updates – HP LaserJet M1319f Multifunction Printer User Manual
Page 143
Advertising
Specks
Smearing
1.
Press
Setup
.
2.
Use the arrow buttons to find the Service menu, and then press
OK
.
3.
Use the arrow buttons to find Cleaning mode, and then press
OK
.
4.
Load plain letter or A4 paper when you are prompted.
5.
Press
OK
again to confirm and begin the cleaning process.
A page feeds through the product slowly. Discard the page when the process is completed.
Clean the exterior
Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off of the exterior of the product.
Firmware updates
Firmware updates and installation instructions for this product are available at
. Click Downloads and drivers, click the operating system, and then select the firmware
download for the product.
ENWW
Manage supplies 133
Advertising